Đặc tính
Housing | Cylindrical thread design |
Thread size | M12 x 1 |
Diameter | Ø 12 mm |
Sensing range Sn | 5 mm … 70 mm 1) |
Safe sensing range Sa | 56.7 mm |
Magnetic sensitivity | ≤ 0.7 mT |
Switching frequency | 1,000 Hz |
Connection type | Male connector M12, 4-pin |
Switching output | NAMUR |
Output characteristic | Control current depending on switching state according to NAMUR EN 60947-5-6 |
Electrical wiring | DC 2-wire |
Magnetic alignment | Axial |
Enclosure rating | IP67 2) |
Cơ khí/ Điện tử
Ripple | ≤ 5 % 1) |
Time delay before availability | ≤ 2 ms |
Hysteresis | ≤ 25 % |
Reproducibility | ≤ 1 % 2) |
Temperature drift (of Sr) | ± 10 % |
EMC | According to EN 60947-5-2 |
Current consumption, sensor is activated | ≥ 2.5 mA |
Current consumption, sensor is not activated | ≤ 1 mA |
Cable resistance | ≤ 50 Ω |
Wire-break protection | ✔ |
Short-circuit protection | ✔ |
Reverse polarity protection | ✔ |
Shock and vibration resistance | 30 g, 11 ms / 10 … 55 Hz, 1 mm |
Ambient operating temperature | –25 °C … +70 °C |
Housing material | Metal, Nickel-plated brass |
Housing length | 62.5 mm |
Thread length | 40 mm |
Tightening torque, max. | ≤ 7 Nm |
Items supplied | Mounting nut, brass, nickel-plated (2x) |
EC Approval Certificate | TÜV 19 ATEX 241335 |
ATEX marking | EX II 1G Ex ia IIC T6 Ga EX II 1D Ex ia IIIC T85 °C Da Ta: –25 °C … +70 °C |
Ex area category | 1G, 1D |
Input voltage Ui max. | 16 V 3) |
Input power Pi max. | 100 mW 3) |
Input current Ii max. | 30 mA 3) |
Internal capacitance Ci max. | 130 nF 3) |
Internal inductance Li max. | 10 µH 3) |
Nominal voltage | 8.2 V DC |