Bộ Nguồn LOGO 6EP3310-6SB00-0AY0
LOGO!POWER 5 V / 3 A Stabilized power supply input: 100-240 V AC output: 5 V DC / 3 A
Input
| Input | 1-phase AC or DC |
| Rated voltage value Vin rated | 100 … 240 V |
| Voltage range AC | 85 … 264 V |
| Input voltage | |
| ● at DC | 110 … 300 V |
| Wide-range input | Yes |
| Overvoltage resistance | 300 V AC for 1 s |
| Mains buffering | at Vin = 187 V |
| Mains buffering at Iout rated, min. | 40 ms; at Vin = 187 V |
| Rated line frequency 1 | 50 Hz |
| Rated line frequency 2 | 60 Hz |
| Rated line range | 47 … 63 Hz |
| Input current | |
| ● at rated input voltage 120 V | 0.36 A |
| ● at rated input voltage 230 V | 0.22 A |
| Switch-on current limiting (+25 °C), max. | 26 A |
| I²t, max. | 0.8 A²·s |
| Built-in incoming fuse | internal |
Output
| Output | Controlled, isolated DC voltage |
| Rated voltage Vout DC | 5 V |
| Total tolerance, static ± | 3 % |
| Static mains compensation, approx. | 0.1 % |
| Static load balancing, approx. | 0.1 % |
| Residual ripple peak-peak, max. | 100 mV |
| Residual ripple peak-peak, typ. | 30 mV |
| Spikes peak-peak, max. (bandwidth: 20 MHz) | 100 mV |
| Spikes peak-peak, typ. (bandwidth: 20 MHz) | 50 mV |
| Adjustment range | 4.6 … 5.4 V |
| Product function Output voltage adjustable | Yes |
| Output voltage setting | via potentiometer |
| Status display | Green LED for output voltage OK |
| On/off behavior | No overshoot of Vout (soft start) |
| Startup delay, max. | 0.5 s |
| Voltage rise, typ. | 100 ms |
| Rated current value Iout rated | 3 A |
| Current range | 0 … 3 A |
| ● Note | +55 … +70 °C: Derating 2%/K |
| Supplied active power typical | 15 W |
| Parallel switching for enhanced performance | Yes |
| Numbers of parallel switchable units for enhanced performance |
2 |



