Bộ Nguồn S7-1500 6EP1332-4BA00 / S7-1500 SIEMENS / ĐAI LÝ SIEMENS VIỆT NAM
Bộ Nguồn S7-1500 6EP1332-4BA00
SIMATIC PM 1507 24 V/3 A Stabilized power supply for SIMATIC S7-1500 input: 120/230 V AC, output: 24 V DC/3 A
SIMATIC PM 1507 24 V/3 A Stabilized power supply for SIMATIC S7-1500 input: 120/230 V AC, output: 24 V DC/3 A
Mã sản phẩm : Bộ Nguồn S7-1500 6EP1332-4BA00
Bảo Hành : 12 Tháng ( chỉ bảo hành lỗi do nhà sản xuất )
Tình trang hàng hóa mới 100%
Xuất xứ : EU
Nhận được báo giá tốt nhất xin vui lòng liên hệ
Hotline/zalo : 0934949833
Email : [email protected]
Bộ Nguồn S7-1500 6EP1332-4BA00
SIMATIC PM 1507 24 V/3 A Stabilized power supply for SIMATIC S7-1500 input: 120/230 V AC, output: 24 V DC/3 A
Input
| Input | 1-phase AC |
| ● Note | Automatic range selection |
| Supply voltage | |
| ● 1 at AC Rated value | 120 V |
| ● 2 at AC Rated value | 230 V |
| Input voltage | |
| ● 1 at AC | 85 … 132 V |
| ● 2 at AC | 170 … 264 V |
| Wide-range input | No |
| Overvoltage resistance | 2.3 × Vin rated, 1.3 ms |
| Mains buffering | at Vin = 93/187 V |
| Mains buffering at Iout rated, min. | 20 ms; at Vin = 93/187 V |
| Rated line frequency 1 | 50 Hz |
| Rated line frequency 2 | 60 Hz |
| Rated line range | 45 … 65 Hz |
| Input current | |
| ● at rated input voltage 120 V | 1.4 A |
| ● at rated input voltage 230 V | 0.8 A |
| Switch-on current limiting (+25 °C), max. | 23 A |
| Duration of inrush current limiting at 25 °C | |
| ● maximum | 3 ms |
| I²t, max. | 1.3 A²·s |
| Built-in incoming fuse | T 3,15 A/250 V (not accessible) |
| Protection in the mains power input (IEC 898) | Recommended miniature circuit breaker: 10 A characteristic B or 6 A characteristic C |
Output
| Output | Controlled, isolated DC voltage |
| Rated voltage Vout DC | 24 V |
| Total tolerance, static ± | 1 % |
| Static mains compensation, approx. | 0.1 % |
| Static load balancing, approx. | 0.1 % |
| Residual ripple peak-peak, max. | 50 mV |
| Spikes peak-peak, max. (bandwidth: 20 MHz) | 150 mV |
| Product function Output voltage adjustable | No |
| Status display | LED green for 24 V OK; LED red for error; LED yellow for stand by |
| On/off behavior | No overshoot of Vout (soft start) |
| Startup delay, max. | 1.5 s |
| Voltage rise, typ. | 10 ms |
| Rated current value Iout rated | 3 A |
| Current range | 0 … 3 A |
| Supplied active power typical | 72 W |
| Short-term overload current | |
| ● on short-circuiting during the start-up typical | 12 A |
| ● at short-circuit during operation typical | 12 A |
| Duration of overloading capability for excess current | |
| ● on short-circuiting during the start-up | 70 ms |
| ● at short-circuit during operation | 70 ms |
| Parallel switching for enhanced performance | No |
