Bộ Nguồn SITOP Siemens 6EP1332-4BA00
SITOP PSU100C 24 V/0.6 A Stabilized power supply input: 100-230 V AC (DC 110-300 V) output: DC 24 V/0,6 A
Input
| Input | 1-phase AC or DC |
| Rated voltage value Vin rated | 100 … 230 V |
| Voltage range AC | 85 … 264 V |
| Input voltage | |
| ● at DC | 110 … 300 V |
| Wide-range input | Yes |
| Overvoltage resistance | 2.3 × Vin rated, 1.3 ms |
| Mains buffering | at Vin = 230 V |
| Mains buffering at Iout rated, min. | 20 ms; at Vin = 230 V |
| Rated line frequency 1 | 50 Hz |
| Rated line frequency 2 | 60 Hz |
| Rated line range | 47 … 63 Hz |
| Input current | |
| ● at rated input voltage 100 V | 0.28 A |
| ● at rated input voltage 230 V | 0.18 A |
| Switch-on current limiting (+25 °C), max. | 28 A |
| I²t, max. | 0.7 A²·s |
| Built-in incoming fuse | internal |
| Protection in the mains power input (IEC 898) | Recommended miniature circuit breaker: from 16 A characteristic B or from 10 A characteristic C |
Output
| Output | Controlled, isolated DC voltage |
| Rated voltage Vout DC | 24 V |
| Total tolerance, static ± | 3 % |
| Static mains compensation, approx. | 0.1 % |
| Static load balancing, approx. | 0.2 % |
| Residual ripple peak-peak, max. | 200 mV |
| Residual ripple peak-peak, typ. | 40 mV |
| Spikes peak-peak, max. (bandwidth: 20 MHz) | 300 mV |
| Spikes peak-peak, typ. (bandwidth: 20 MHz) | 20 mV |
| Product function Output voltage adjustable | No |
| Output voltage setting | – |
| Status display | Green LED for output voltage OK |
| On/off behavior | Overshoot of Vout approx. 5 % |
| Startup delay, max. | 1 s |
| Voltage rise, typ. | 25 ms |
| Rated current value Iout rated | 0.6 A |
| Current range | 0 … 0.6 A |
| Supplied active power typical | 14 W |
| Short-term overload current | |
| ● at short-circuit during operation typical | 1 A |
| Parallel switching for enhanced performance | No |



