Bộ Nguồn SITOP 6EP1332-2BA20 / SITOP SIEMENS / ĐAI LÝ SIEMENS VIỆT NAM

Bộ Nguồn SITOP Siemens 6EP1332-2BA20
SITOP PSU100S 24 V/2.5 A Stabilized power supply input: 120/230 V AC, output: DC 24 V/2,5 A

Mã sản phẩm : Bộ nguồn 6EP1332-2BA20

Bảo Hành : 12 Tháng ( chỉ bảo hành lỗi do nhà sản xuất )

Tình trang hàng hóa mới 100%

Xuất xứ : EU

Nhận được báo giá tốt nhất xin vui lòng liên hệ
Hotline/zalo : 0934949833

Email : [email protected]

Bộ Nguồn SITOP Siemens 6EP1332-2BA20

SITOP PSU100S 24 V/2.5 A Stabilized power supply input: 120/230 V AC, output: DC 24 V/2,5 A

Input

Input	1-phase AC
● Note	Automatic range selection
Supply voltage
● 1 at AC Rated value	120 V
● 2 at AC Rated value	230 V
Input voltage
● 1 at AC	85 … 132 V
● 2 at AC	170 … 264 V
Wide-range input	No
Overvoltage resistance	2.3 × Vin rated, 1.3 ms
Mains buffering	at Vin = 93/187 V
Mains buffering at Iout rated, min.	20 ms; at Vin = 93/187 V
Rated line frequency 1	50 Hz
Rated line frequency 2	60 Hz
Rated line range	47 … 63 Hz
Input current
● at rated input voltage 120 V	1.25 A
● at rated input voltage 230 V	0.74 A

Switch-on current limiting (+25 °C), max.	33 A
I²t, max.	0.4 A²·s
Built-in incoming fuse	T 3,15 A/250 V (not accessible)
Protection in the mains power input (IEC 898)	Recommended miniature circuit breaker: from 3 A characteristic C

Output

Output	Controlled, isolated DC voltage
Rated voltage Vout DC	24 V
Total tolerance, static ±	3 %
Static mains compensation, approx.	0.1 %
Static load balancing, approx.	1 %
Residual ripple peak-peak, max.	150 mV
Residual ripple peak-peak, typ.	30 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)	240 mV
Spikes peak-peak, typ. (bandwidth: 20 MHz)	70 mV
Adjustment range	22.8 … 28 V
Product function Output voltage adjustable	Yes
Output voltage setting	via potentiometer
Status display	Green LED for 24 V OK
Signaling	Relay contact (NO contact, rating 60 V DC/ 0.3 A) for “24 V OK”
On/off behavior	Overshoot of Vout < 3 %
Startup delay, max.	0.3 s
Voltage rise, typ.	15 ms
Rated current value Iout rated	2.5 A
Current range	0 … 3 A
● Note	3 A up to +45°C; +60 … +70 °C: Derating 3%/K
Supplied active power typical	60 W
Short-term overload current
● on short-circuiting during the start-up typical	9 A
● at short-circuit during operation typical	9 A
Duration of overloading capability for excess current
● on short-circuiting during the start-up	100 ms
● at short-circuit during operation	800 ms
Parallel switching for enhanced performance	Yes
Numbers of parallel switchable units for enhanced performance	2